Tungsten carbide High Quality Ground Ground YG8 Round Rod Bar

Ekhaya

IINDIDI

QHAGAMSHELANA NATHI

Tungsten carbide High Quality Ground Ground YG8 Round Rod Bar

Ibakala:YG8

Ubungakanani:Inokwenziwa ngokwezifiso okanye umgangatho

Izinto eziphathekayo: 100% tungsten carbide

I-imeyile：

info@cdcarbide.com

Ingxelo

Tungsten carbide High Quality Ground Ground YG8 Round Rod Bar

Isicelo

Iintonga ze-carbide eziqinileyo (i-carbide rod / i-carbide intonga yexabiso / i-carbide intonga engenanto ingasetyenziselwa ukwenza amasuntswana e-drill, i-automobile cutter ekhethekileyo, ibhodi yesekethe eprintiweyo, abasiki abakhethekileyo, abasiki bee-injini ezikhethekileyo, i-horology, ukucubungula abasiki abakhethekileyo, ukugaya okuthe nkqo okudibeneyo. umsiki, umthubi kunye njl.

Ngaphandle koko, zinokusetyenziselwa ukwenza intloko yokunyathela ngesamente ye-carbide, ibha engundoqo kunye nezixhobo zokubhoboza.
Iintonga ze-carbide ezenziwe ngesamente zisetyenziselwa ukusika i-aluminium alloy, isinyithi esityhidiweyo, isinyithi esingenasici, insimbi ye-refractory alloy, i-nickel esekelwe kwi-alloy, i-titanium alloy kunye nesinyithi esingenawo i-ferrous, amanqanaba ahlukeneyo e-carbide aneempawu ezizinzileyo ziye zamkelwa ngokubanzi ngabenzi bezixhobo zehlabathi. Sinako ukuvelisa iintonga ze-carbide ezingenamhlaba kunye nezisekelwe phantsi.

Iimpawu ze-Cemented carbide rod
1. amandla aphezulu kunye nobunzima obuphezulu.
2. Ukuqina okugqwesileyo, ukumelana nokunxiba, imodyuli ephezulu enwebekayo, amandla aphezulu okuguquguquka,
3. Uzinzo oluhle lweekhemikhali (i-asidi, i-alkali, i-oxidation yobushushu obuphezulu), ukumelana nempembelelo,
4. ukuqina okulungileyo, i-coefficient ephantsi yokwandisa njl.

Uluhlu lobungakanani bengqolowa: 1.2; 1.0; 0.8; 0.7; 0.6; 0.5; 0.4

Uluhlu lobude: 3mm--1400mm

Uburhabaxa boMphezulu bunokufikelelwa ku: RA0.04.(fikelela kumphezulu wesiphumo sesipili emva kokusila ngokuchanekileyo)

Ububanzi bobubanzi: 0.1mm--60mm.

Ububanzi beBanga: h5(H5), h6(H6), h7(H7), h8(H8), h9(H9).

Itshathi yeBanga

IBanga	ISO	Ubungakanani beenkozo	Umxholo weCobalt (wt-%)	Ubuninzi be-g/cm3	UBUNZIMA HRA	TRS (N/mm2)	ISICELO
K10UF	K05-K10	0.6	6.0	14.8	94	3800	Ubungakanani bengqolowa obucokisekileyo, obunokumelana nokunxiba okuphezulu ukumelana neendmill kunye nezixhobo zokukrola ziyanconywa.zilungele ukusika iPCB kunye neplastiki.
CD6	K10	1.0	6.0	14.95	92	3000	I-Drilk endmill kunye ne-burr iyanconywa.Ingakumbi ifanelekile ukusika isinyithi esingenantsimbi kunye negraphite (i-coating iyadingeka).
K20UF	K20	0.7	8.0	14.6	92.5	3200	Ukusika i-aluminiyam ngokukodwa.
K40UF	K30	0.6	10	14.4	91.8	3000	I-drill kunye ne-endmill iyacetyiswa. Ifanelekile ukusika i-steek engenakunqanda ukushisa kwe-alloy kunye nentsimbi.
CD15	K40	1.5	15	14	87.6	4000	Ilungele ukwenza i-punching yokubumba, izixhobo kunye ne-anti-vibration boring bar njl.

Umfanekiso weenkcukacha

Tungsten carbide High Quality Finely Ground YG8 Round Rod Bar

正在上传...

FAQ:

Q1: Ngaba uyiFactory okanye inkampani yokurhweba?
SiyiFactory kunye neminyaka eyi-12 yamava emveliso.

Q2: Uphi umzi-mveliso wakho?
Sifumaneka kwisixeko saseZhuzhou, kwiphondo laseHunan apho isiseko se- tungsten carbide .

I-Q3: Ngaba ixabiso liyakhuphisana?
SineFactory eyethu. Siyabulela kwimveliso eyomeleleyo kunye nenkqubo yokuhambisa, sithembisa ukunika abathengi bethu elona xabiso likhuphisanayo.

I-Q4: Ngaba iimveliso zikumgangatho ophezulu?
Ewe. Zonke iimveliso ziya kuvavanywa phambi kokuveliswa kobuninzi, kwaye siya kujonga iipropati ezibonakalayo, imilo kunye nokunyamezela ukuqinisekisa iimveliso ezifanelekileyo ngaphambi kokuthunyelwa.

Nceda uqhagamshelane nam:

Aimee
Umlawuli wentengiso

Zhuzhou Chuangde Cemented Carbide Co
215, building 1, International Students Pioneer Park,
I-TaishanRoad, iSithili se-Tianyuan, iSixeko sase-Zhuzhou .
I-imeyile:info@cdcarbide.com
Tel:+86-731-22506139
Mobile:+8613786352688
Whatspp/wechat/Skype : 0086 13786352688

IIMVELISO EZINXULUMENEYO