Tungsten carbide welding rod bar for hard facing/ driling use golden color

YG Series Cemented Carbide Surfacing Rod is made by mixing the granular cemented carbide particles as the hard phase and the copper alloy or nickel alloy as the bonding phase through high-temperature sintering. It is rod- shaped, and also commonly known as“Wolf Teeth Mace" due to the protruding alloy particles on the surface of the rod. The granular particles are WC-Co cemented carbide, with the hardness of HRA89.5-91; the bonding metal is divided into copper-based alloy and nickel-based alloy; it is suitable for oxyacetylene welding process, with the surfacing temperature of about1000℃.

 Production  of  Copper Or Nickel Tungsten carbide rod Cemented Carbide Composite Welding Rods

The oxyacetylene butt, the operating process is as follows:

(1) clean up the workpiece, make the welding workpieces surface with metallic luster.

(2) the flat position of welding, therefore can use the appropriate clamping fixture for control of surfacing layer thickness, thick piece of available.

(3) with a neutral flame preheating, flame core not contact surface, the distance to 25 mm is advisable.

(4) carbide surfacing welding layer.With YD type electrode surfacing, the use of neutral flame (can be slightly carbonizing flame) tip is steady on the workpiece surface movement, the flame of the alloy electrode heating (be careful not to make flame cone tip contact alloy particles), tire body in the electrode alloy melt, carbide particles are also falling.Before the tire body of molten metal solidification, the particles arrange, can use left hand of the alloy electrode fingers, or another person holding a base electrode or pull rod on graphite rod in a quick stir particles, making them evenly aligned neatly.Surfacing layer thickness control according to the requirements of design.

(5) after the workpiece welding, where no ventilation, slow cooling, cannot quench, conditional usable asbestos blanket cover.

(6) the workpiece after cooling to room temperature, if necessary, grinding surface surfacing to required size and shape.

(7) clean up the workpiece, remove all splash, slag, etc.

Applications

YG Series Cemented Carbide Surfacing Rod is mainly used for surfacing the severely worn or cut workpieces in

petroleum, mining, coal mining, geology, construction and other industries, such as milling shoes, grinding shoes, centralizers, reamers, drill pipe joints, hydraulic cutters, scraper blades, coal plough bits, coring bits, piling bits, auger bits, etc.

Packing

step 1, wrapped carbide thread boring rods in paper to avoid carbide thread boring rods to broke
step 2, put the carbide thread boring rods in inner small carton box
step 3, put the inner box into outter carton and fill the carton with foamed plastic
step 4, wrap the carton with packaging tape
step 5, you can choose any delivery way such as DHL,TNT,UPS ect.

ପ୍ରଶ୍ନ:

Q1: ଆପଣ କାରଖାନା ନା ବାଣିଜ୍ୟ କମ୍ପାନୀ?
ଆମେ 12 ବର୍ଷର ଉତ୍ପାଦନ ଅଭିଜ୍ଞତା ସହିତ କାରଖାନା |

Q2: ଆପଣଙ୍କ କାରଖାନା କେଉଁଠାରେ ଅବସ୍ଥିତ?
ଆମେ ହୁନାନ ପ୍ରଦେଶର ଜୁଜୋ ସହରରେ ଅବସ୍ଥିତ ଯେଉଁଠାରେ ଟୁଙ୍ଗଷ୍ଟେନ୍ କାର୍ବାଇଡ୍ର ମୂଳ ସ୍ଥାନ |

Q3: ମୂଲ୍ୟ ପ୍ରତିଯୋଗୀ କି?
ଆମର ନିଜସ୍ୱ କାରଖାନା ଅଛି | ଶକ୍ତିଶାଳୀ ଉତ୍ପାଦନ ଏବଂ ବିତରଣ ବ୍ୟବସ୍ଥା ପାଇଁ ଧନ୍ୟବାଦ, ଆମେ ଆମର ଗ୍ରାହକମାନଙ୍କୁ ସବୁଠାରୁ ପ୍ରତିଯୋଗୀ ମୂଲ୍ୟ ପ୍ରଦାନ କରିବାକୁ ପ୍ରତିଜ୍ଞା କରୁଛୁ |

Q4: ଉତ୍ପାଦଗୁଡିକ ଉଚ୍ଚ ଗୁଣବତ୍ତା କି?
ହଁ ବଲ୍କ ଉତ୍ପାଦନ ପୂର୍ବରୁ ସମସ୍ତ ଉତ୍ପାଦଗୁଡିକ ପରୀକ୍ଷା କରାଯିବ, ଏବଂ ପରିବହନ ପୂର୍ବରୁ ଯୋଗ୍ୟ ଉତ୍ପାଦଗୁଡିକ ନିଶ୍ଚିତ କରିବା ପାଇଁ ଆମେ ଭ physical ତିକ ଗୁଣ, ଆକୃତି ଏବଂ ସହନଶୀଳତା ଯାଞ୍ଚ କରିବୁ |

ମୋ ସହିତ ଯୋଗାଯୋଗ କରିବାକୁ ମୁକ୍ତ ହୁଅନ୍ତୁ:

ଏମି
ବିକ୍ରୟ ପରିଚାଳକ

ଜୁଜୋ ଚୁଆଙ୍ଗଡେ ସିମେଣ୍ଟେଡ୍ କାର୍ବାଇଡ୍ କୋ
215, building 1, International Students Pioneer Park,
TaishanRoad, Tianyuan ଜିଲ୍ଲା, ଜୁଜୋ ସହର |
ଇମେଲ୍:info@cdcarbide.com
Tel:+86-731-22506139
Mobile:+8613786352688
ହ୍ ats ାଟସ୍ ଆପ୍ / ୱେଚ୍ / ସ୍କାଇପ୍: 0086 13786352688 |