FLOKKAR
HAFÐU SAMBAND VIÐ OKKUR
Wholesale customization YG6 Tungsten Carbide Bush Hammer Pin Needle Tips for Litchi Surface and Safety Hammer
![](/Public/images/email-go.png)
Wholesale customization YG6 Tungsten Carbide Bush Hammer Pin Needle Tips for Litchi Surface and Safety Hammer
YG6 Tungsten Carbide Bush Hammer Pin Needle Tips for Litchi Surface and Safety Hammer
Material: 100% raw material
Usage: brazed on bush hammer
Grade: YG8
Size: diameter 5* 17mm
Grade
Grade | Co(%) | Density(g/cm3) | HRA | T.R.S (MPa) |
YG6 | 6 | 14.85-15.0 | 90.5 | 2400 |
YG8 | 8 | 14.65-14.8 | 89.8 | 2800 |
YG10X | 10 | 14.3-14.5 | 91 | 2500 |
Dimension of brazed on Bush Hammer for Concrete Litchi Surface Grinding Carbide pins tips
Specification | Diameter | Length | V(mm3) |
MD3070 | 3.0 | 7.0 | 40.9 |
MD3575 | 3.5 | 7.5 | 57.4 |
MD3675 | 3.6 | 7.5 | 60.1 |
MD4575 | 4.5 | 7.5 | 84.8 |
MD4585 | 4.5 | 8.5 | 101 |
MD5011 | 5.0 | 11 | 170 |
MD5272 | 5.2 | 7.2 | 97.5 |
Application of brazed on Bush Hammer for Concrete Litchi Surface Grinding Carbide pins tips
1, bush hammer carbide tips was brazed on round litchi mill machine for percussion or chisel on the granite surface, in form a stone surface, such as litchi skin rough surface,granite litchi surface more use in sidewalk surface or square floor and so on for anti-slip.
2, bush hammer carbide tips will has more hardness and abrasive resistance, especially at higher temperature, it still has higher hardness
3, bush hammer carbide tips has very high elastic modulus
Production and test
1. About raw materials and powder:
After the order is confirmed, bush hammer carbide tips will start to prepare the RTP powder as per customer’s requirement with our wet-grinding machine.
2. About pressing:
Before mass production, we need to do a trial pressing and sintering for bush hammer carbide tips, and we check the appearances and the sizes of bush hammer carbide tips samples with micrometer, projectors etc. to ensure that the requirements of the drawings can be met before batch production;
3. About Furnace:
1).How many furnaces?
5 sets of vacuum sintering furnace and 1set of HIP
5 sets of sintering furnace and one set of HIP in the factory ensure the best quality and production capacity.
4. About cleaning/tumbling :
1). clean/tumble bush hammer carbide tips to make the products look more beautiful.
2). bush hammer carbide tips can be ground and sharp according to customers’ order tolerance requirement.
5 About laboratory:
1.How do you produce samples for control?
We sample each batch RTP into pressing and sintering, only when certificated by the laboratory, the RTP can be put into mass production.
Algengar spurningar:
Q1: Ertu verksmiðja eða viðskiptafyrirtæki?
Við erum verksmiðja með 12 ára framleiðslureynslu.
Q2: Hvar er verksmiðjan þín staðsett?
Við erum staðsett í Zhuzhou borg, Hunan héraði, þar sem er grunnur úr wolframkarbíði.
Q3: Er verðið samkeppnishæft?
Við höfum okkar eigin verksmiðju. Þökk sé sterku framleiðslu- og dreifingarkerfi lofum við að bjóða viðskiptavinum okkar samkeppnishæfasta verðið.
Q4: Eru vörurnar hágæða?
Já. Allar vörur verða prófaðar fyrir magnframleiðslu og við munum athuga eðliseiginleika, lögun og umburðarlyndi til að tryggja hæfar vörur fyrir sendingu.
Ekki hika við að hafa samband við mig:
Aimee
Sölustjóri
Zhuzhou Chuangde Cemented Carbide Co. Ltd
215, building 1, International Students Pioneer Park,
TaishanRoad, Tianyuan hérað, Zhuzhou borg.
Netfang:info@cdcarbide.com
Tel:+86-731-22506139
Mobile:+8613786352688
Whatspp/wechat/Skype: 0086 13786352688
SKYLDAR VÖRUR
SENDU OKKUR PÓST
Zhuzhou Chuangde Cemented Carbide Co., Ltd
Bæta við215, bygging 1, International Students Pioneer Park, Taishan Road, Tianyuan District, Zhuzhou City
SENDU OKKUR PÓST
HÖNDUNARRETTUR :Zhuzhou Chuangde Cemented Carbide Co., Ltd
Sitemap
XML
Privacy policy