YG6 Tungsten Carbide Bush Hammer Pin Needle Tips for Litchi Surface and Safety Hammer

Material: 100% raw material
Usage: brazed on bush hammer 

Grade: YG8

Size: diameter 5* 17mm

Grade 

Dimension of brazed on Bush Hammer for Concrete Litchi Surface Grinding Carbide pins tips

Application of brazed on Bush Hammer for Concrete Litchi Surface Grinding Carbide pins tips

1, bush hammer carbide tips was brazed on round litchi mill machine for percussion or chisel on the granite surface, in form a stone surface, such as litchi skin rough surface,granite litchi surface more use in sidewalk surface or square floor and so on for anti-slip.

2, bush hammer carbide tips will has more hardness and abrasive resistance, especially at higher temperature, it still has higher hardness

3, bush hammer carbide tips has very high elastic modulus

Production and test

1. About raw materials and powder:

After the order is confirmed, bush hammer carbide tips will start to prepare the RTP powder as per customer’s requirement with our wet-grinding machine.

 2. About pressing:

Before mass production, we need to do a trial pressing and sintering for bush hammer carbide tips, and we check the appearances and the sizes of bush hammer carbide tips samples with micrometer, projectors etc. to ensure that the requirements of the drawings can be met before batch production;

3. About Furnace:

1).How many furnaces?

5 sets of vacuum sintering furnace and 1set of HIP

5 sets of sintering furnace and one set of HIP in the factory ensure the best quality and production capacity.

4. About cleaning/tumbling :

1). clean/tumble bush hammer carbide tips to make the products look more beautiful.

2). bush hammer carbide tips can be ground and sharp according to customers’ order tolerance requirement.

5 About laboratory:

1.How do you produce samples for control?

We sample each batch RTP into pressing and sintering, only when certificated by the laboratory, the RTP can be put into mass production.

Pertanyaan Umum:

Q1: Apakah Anda Pabrik atau perusahaan dagang?
Kami adalah Pabrik dengan 12 tahun pengalaman produksi.

Q2: Di mana lokasi pabrik Anda?
Kami berlokasi di kota Zhuzhou, provinsi Hunan yang merupakan basis tungsten karbida.

Q3: Apakah harganya Kompetitif?
Kami memiliki Pabrik kami sendiri. Berkat sistem produksi dan distribusi yang kuat, kami berjanji untuk menawarkan harga yang paling kompetitif kepada pelanggan kami.

Q4: Apakah produknya Berkualitas Tinggi?
Ya. Semua produk akan diuji sebelum produksi massal, dan kami akan memeriksa sifat fisik, bentuk, dan toleransi untuk memastikan produk yang memenuhi syarat sebelum pengiriman.

Jangan ragu untuk menghubungi saya:

Aimee
Manajer penjualan

Zhuzhou Chuangde Semen Karbida Co.Ltd
215, building 1, International Students Pioneer Park,
Jalan Taishan, Distrik Tianyuan, Kota Zhuzhou.
E-mail:info@cdcarbide.com
Tel:+86-731-22506139
Mobile:+8613786352688
Whatspp/wechat/Skype :  0086 13786352688