Tungsten carbide High Quality Finely Ground YG8 Round Rod Bar

Gida

TUNTUBE MU

Tungsten carbide High Quality Finely Ground YG8 Round Rod Bar

Darasi: YG8

Girma: Za a iya keɓancewa ko daidaitaccen tsari

Material: 100% tungsten carbide

Imel：

info@cdcarbide.com

Jawabin

Tungsten carbide High Quality Finely Ground YG8 Round Rod Bar

Aikace-aikace

M cimined sandunan carbide (carbide sanda mashaya / m carbide sanda farashin / carbide sanda blanks za a iya amfani da yin daban-daban rawar soja rago, mota musamman abun yanka, buga kewaye jirgin, na musamman cutters, engine na musamman cutters, horology, sarrafa na musamman cutters, hade a tsaye milling. abun yanka, kaburbura da sauransu.

Bayan haka, ana iya amfani da su don yin shugaban simintin simintin carbide, mashaya mai mahimmanci da kayan aikin perforation.
Ana amfani da sandunan simintin carbide don yankan aluminum gami, jefa baƙin ƙarfe, bakin karfe, refractory gami karfe, nickel tushen gami, titanium gami da ba ferrous karfe, daban-daban carbide maki tare da barga Properties an yadu gane ta duniya kayan aiki masu yin. Za mu iya samar da sandunan carbide marasa tushe da ƙasa.

Siffofin sandar simintin siminti
1. ƙarfi mai ƙarfi da taurin gaske.
2. m taurin, lalacewa-juriya, high na roba modulus, high flexural ƙarfi,
3. Kyakkyawan kwanciyar hankali na sinadarai (acid, alkali, oxygenation high zafin jiki), juriya mai tasiri,
4. mai kyau tauri, low coefficient na fadada da dai sauransu.

Girman girman hatsi: 1.2; 1.0; 0.8; 0.7; 0.6; 0.5; 0.4

Tsawon tsayi: 3mm--1400mm

Za'a iya isa ga Roughness na Surface zuwa: RA0.04.(isa kai saman tasirin madubi bayan niƙa daidai)

Tsawon diamita: 0.1mm--60mm.

Girman Diamita: h5(H5), h6(H6), h7(H7), h8(H8), h9(H9).

Jadawalin daraja

Daraja	ISO	Girman hatsi	Abubuwan Cobalt (wt-%)	Girman g/cm3	HARDNESS HRA	TRS (N/mm2)	APPLICATION
K10UF	K05-K10	0.6	6.0	14.8	94	3800	Ultrafine hatsi size, tare da mai kyau lalacewa resistant.higher lalacewa resistant endmill da engraving kayan aikin suna shawarar. dace da yankan PCB da filastik.
CD6	K10	1.0	6.0	14.95	92	3000	Drilk endmill da burr ana ba da shawarar.Musamman dace don yankan ƙarfe mara ƙarfe da graphite (ana buƙatar sutura).
K20UF	K20	0.7	8.0	14.6	92.5	3200	Don yankan aluminum na musamman.
K40UF	K30	0.6	10	14.4	91.8	3000	Ana ba da shawarar hakowa da injin niƙa. Dace da yankan bakin steek zafi jure gami da jefa baƙin ƙarfe.
CD15	K40	1.5	15	14	87.6	4000	Dace da yin naushi na molds, kayan aiki da anti-vibration m mashaya da dai sauransu.

Hoton daki-daki

Tungsten carbide High Quality Finely Ground YG8 Round Rod Bar

正在上传...

FAQ:

Q1: Shin ku masana'anta ne ko kamfani na kasuwanci?
Mu ne Factory da shekaru 12 na samar da kwarewa.

Q2: Ina ma'aikatar ku take?
Muna cikin birnin Zhuzhou, lardin Hunan inda tushen tushen carbide tungsten yake.

Q3: Shin Farashin Gasa ne?
Muna da namu Factory. Godiya ga tsarin samarwa mai ƙarfi da rarrabawa, mun yi alkawarin ba abokan cinikinmu mafi kyawun farashi.

Q4: Shin samfuran suna da inganci?
Ee. Za a gwada duk samfuran kafin samarwa da yawa, kuma za mu bincika kaddarorin jiki, siffa da haƙuri don tabbatar da samfuran da suka cancanta kafin jigilar kaya.

Jin dadin tuntube ni:

Aimee
Manajan tallace-tallace

Kudin hannun jari Zhuzhou Chuangde Cemented Carbide Co., Ltd
215, building 1, International Students Pioneer Park,
TaishanRoad, Gundumar Tianyuan, Birnin Zhuzhou.
Imel:info@cdcarbide.com
Tel:+86-731-22506139
Mobile:+8613786352688
WhatsApp/wechat/Skype: 0086 13786352688

KAYAN DA AKA SAMU